Close this search box.

Above Ground Pool Repair Tips and Maintenance

Above Ground Pool Repair

Above-ground pools are a hit for various reasons. They’re affordable and simple to set up, and you can start splashing around in them within a few days. So, what’s the downside? Well, here’s the scoop: lots of folks treat their above-ground pools like blow-up toys and hardly do anything to keep them tidy. After a while, the water turns into a nasty green mess, and they give up, heading to the public pool instead.

But it doesn’t have to be this way. Even though above-ground pools need less upkeep than the in-ground ones, they still need some love each week. Wanna know how to keep your above-ground pool sparkling all summer long? Let’s dive in.

Is Above-Ground Pool Maintenance Different?

Don’t buy into the idea that above-ground swimming pools require zero upkeep. Taking care of one is pretty similar to looking after an in-ground pool. You’ll need a pool filter, some chemicals, and maybe an automatic cleaner. The big difference? Above-ground pools are smaller, so these tasks don’t take up as much time. Plus, they’re usually simpler to clean because they often lack decking or coping, and they tend to have even depths.

But here’s the thing: above-ground pools face the wrath of Mother Nature. They can rust, lose color, or even tear because they’re out in the open. So, you might need to swap out the pool or its lining every few years.


How to Care for Your Above-Ground Pool

It’s not as difficult as you might think to maintain an above-ground swimming pool. Keep your above-ground swimming pool in top condition all year long with these eight tips:

1. Run Your Pool Pump Daily

Running your pool pumps every day is a must to keep the water flowing through your filters. Ideally, you want the water in your pool to go through the filters at least twice a day. How long it takes depends on how big your pool is and what kind of pump you’ve got. It could be anywhere from 4 to 8 hours.

Want to save some energy and money? Consider switching from a single-speed pump to a variable-speed one. Not only is it more energy-efficient, but you can also run it at a lower speed, which means less noise and better filtration.

2. Keep Your Pool Water Balanced

Make it a habit to test your pool water once a week to steer clear of any green or cloudy surprises. You can even scoop up a tiny sample and take it to your nearby pool shop for a pro-check-up When it comes to tweaking your chemicals, stick to this order: pH, alkalinity, free chlorine, and cyanuric acid.

3. Clean Your Pool Regularly

While your filter does a good job clearing out most leaves, grass clippings, and other stuff, some residue might still lurk at the bottom of your pool. This can turn into a breeding ground for bacteria and algae. To dodge this, start with a skimmer followed by a pool cleaner. If you’re watching your wallet, you can opt for a manual vacuum or a robotic cleaner for quick and effective cleanup.

For ongoing maintenance, consider a wall-mounted, hanging, or floating skimmer. It’ll scoop up water and catch debris before they clog your filter or sink to the bottom. Just empty the basket once a week, and you’ll save yourself from hours of skimming duty.

4. Rinse the Filter

Above-ground pools can get pretty grimy since they usually have smaller pumps and fewer filters. That’s why it’s crucial to keep tabs on the filter pressure gauge. If it creeps up to 10 PSI above its usual reading, it’s time for a filter clean-up. Take out the cartridge filters, give ’em a good hose-down, and set the multiport valve to backwash to flush out the media.

5. Use a Pool Cover

You can shield your above-ground pool from the elements by using pool covers when it’s not in use. These covers can slash evaporation by up to 95% and even warm up your pool. For top-notch results, go for a thermal or solar pool cover. If you’ve got a big pool with decking or steps, think about getting an automatic cover installed for added convenience.

 6. Maintain the Right Water Level in Your Pool

Make sure the water level in your pool is high enough for the pump to do its job properly. If it’s too low, the pump could get damaged. Water levels can dip because of evaporation, heat, splashing, or when you’re vacuuming. Keep an eye on it and top up the water whenever necessary.

7. Inspect the Surface for Any Damage

Above-ground pools can be made from various materials like concrete, fiberglass, and vinyl. Vinyl is the crowd favorite, mainly because it’s easy on the wallet, simple to maintain, and comes in lots of sizes and colors. But watch out for sharp stuff like nails—they can tear the vinyl liner, causing leaks and making your pool look less than stellar.

To steer clear of this, give your pool a regular once-over for any leaks and keep a patching kit handy. Most vinyl patches can be applied underwater, so you won’t need to drain your pool. Vinyl liners typically last up to 15 years, but if they’re looking old or worn out, it might be time to consider a replacement.

8. Winterize Your Pool

No matter the size of your pool, avoid emptying it when the weather turns cold. Not only is it a hassle and pricey to drain and refill, but it can also harm the pool’s structure. Instead, close it up for the winter. This involves cleaning and brushing the surfaces, lowering the water level, adding a long-lasting algaecide, covering it up, and running the pump a bit each day. Don’t forget to balance the water chemistry every few weeks. Doing this will make reopening the pool in spring a breeze. For more details on winter pool care, check out this article.

how to install above ground pool


Above-Ground Pool FAQs

Do I Need Permits and Fencing for an Above-Ground Pool?

Depending on where you live, you might need council approval before installing an above-ground pool. Usually, you’ll need a permit if the pool is deeper than 300mm. This rule applies to portable pools and spas too. Make sure to look up your state or territory’s pool fencing regulations to see if you need compliant gates and fencing for your above-ground pool.

How Do I Move or Relocate an Above-Ground Pool?

Moving some above-ground swimming pools is easier than others. If your pool doesn’t have decking, the process is pretty straightforward. Just drain the pool and take it apart carefully. Then, put it back together in the spot you want. Just make sure there’s power nearby and that your new surface (not grass) is nice and level.

If you’re not confident about moving it yourself, short on time, or dealing with a big pool, you can always hire a pool moving company to do it for you.

Need Help with Your Above Ground Pool Maintenance?

If you’re facing challenges with your above ground pool or just want to ensure it stays in top shape, Clear Tech Pools is your go-to expert in St Petersburg and the greater Tampa Bay area. From simple repairs to comprehensive maintenance tips, we provide all the services you need to keep your pool safe, clean, and enjoyable. Trust our experienced team to extend the life of your pool with professional advice and top-notch service solutions. 

Contact Clear Tech Pools today, and let us help you maintain a perfect pool all year round. Visit our website or call us to learn more about our services and schedule your maintenance check!

Our Pool Services