Close this search box.

How Long to Run Pool Pump in Florida

How Long to Run Pool Pump in Florida

How long should you run your pool pump in your Florida pool? While it might seem ideal to have a question that can be answered anytime, day or night, forever, the truth is, that scenario would lead to an incredibly high electric bill. It’s important to recognize why our pool pump runs.

Now, let’s go and find two more jobs to cover those costs. However, in reality, this isn’t practical or necessary. Understanding the purpose of our pool pump is key.

What Is a Pool Pump?

If your pool water doesn’t move around, it quickly turns into a dirty mess, full of algae, bugs, and other gross stuff. Keeping the water circulating is crucial for keeping your pool clean. The pump plays the main role in this.

Here’s how it works: The pool pump pulls water from the drains or skimmers in the pool and pushes it through the filter. It doesn’t matter what kind of filter you have, as long as the water flows through it. This is how the filter catches all the dirt and bacteria.

Experts say your pool’s water should be turned over 2 or 3 times a day to keep it clean. A typical 1-horsepower (hp) pump can pump about 80 gallons per minute (gpm). So, it would take around 8 hours for a 1-hp pump to circulate a 12,000-gallon swimming pool thrice a day.


How Long to Run Pool Pump in Florida

When Should You Run Your Pool Pump?

When you run your pool pump, it is just as crucial as how long you run it in your Florida pool. Most pools require running for a minimum of 8 to 12 consecutive hours every day. But what does that mean? Do they need to run during daylight or nighttime hours? And what exactly do we mean by “night”?

How can you enjoy these benefits without spending extra on electricity? Let’s keep it simple. First, figure out your pump’s flow rate and speed options. Keep reading to learn how!

Flow Rate

Your pump’s flow rate is the volume of water it filters within a set time. This is also known as its speed. Note: This isn’t the same as the turnover rate. You can find the flow rate listed in the manufacturer’s instructions, usually measured in gallons per minute (gpm) or gallons per hour (gph).

Speed-control Option

The next step is to determine the speed options for your pool pump. There are usually two types of pool pump, a one-speed and two-speed.

A single-speed motor has only one flow rate. This is. It is the simplest of the two pumps, as it comes with a timer that does most of the work. You don’t need to worry about the timing of when to increase or decrease the speed. The downside is that you can’t run the pump at a slower speed to save on energy.

Two-speed pumps are a great improvement: You can switch between high and low speeds by flipping a switch. Low speeds mean less noise, which is also a great benefit.

Turn Over Rate

The next step is to figure out the turnover rate. This is how long it takes for the pumping and filtration system to circulate all the water in your pool once. Usually, a pool’s turnover rate is eight hours or less.

You should also know that during times when there are many swimmers or when it’s really hot in the summer, your pump needs to run at higher speeds and for longer periods. For instance, after your child’s party with 12 friends, it’s a good idea to run the pump longer. And during those hot Florida summers, you might need to run it even longer.

You can use this formula to calculate your turnover rate.


Pool Volume (gallons of pool water)


Flow Rate (gallons filtered per hour)


Total hours for one complete turnover


You can reduce your costs by running your pool pump at night or during off-peak hours when electricity rates are lower. Electricity companies charge more during peak hours when there’s high demand, usually when people are using a lot of power, like in the late afternoon or evening when they’re using air conditioning.

To find out when peak hours are in your area, just give your service provider a quick call. Once you know the peak times, schedule your pool pump to run during off-peak hours to save money.

You should run your pool pump for at least 8 hours a day to complete one cycle, but it doesn’t have to be continuous. You can split it up and run it for a few hours here and there, as long as it adds up to 8 hours or more in a 24-hour period.

The main point is to run the pump for an average of 8 hours long each day to circulate and clean the water in your Florida pool, which should be enough to push the entire pool’s volume through the filter once. Proper water chemistry is also crucial for keeping your pool sanitized. Even if you’re circulating the water well, if the chemicals are unbalanced, you’ll run into problems. So, make sure your water chemistry is right, and a good run through the filter should take care of any bacteria.


Run Your Pool Pump at Non-peak Hour

Did you know that electricity rates change throughout the day? The rate depends on what electric companies call “peak hours.” These are times when many people are using a lot of electricity, putting a strain on the power grid.

Peak hours can vary depending on where you live. In warmer climates, peak hours often happen in the late afternoon and early evening when people turn up their air conditioning after coming home from work.

You can find out the peak times in your area with a quick call to your pool service provider. To keep your costs down, schedule your pool pump to run during non-peak hours.

Run Your Pool From Sunrise to Sunset

While it might seem logical to run the pump during the day while people are swimming to keep the water clean, there are a few other things to consider.

If you live in a hot climate, people will likely be using their air conditioners during the day, which can increase electricity demand.

To manage this, you can use multiple timer pins. These will automatically turn on the pump at the right times. For example, you could run the pump from 8 am to 1 pm and then again from 6 pm to 9 pm. This way, you still get your 8 hours of runtime while avoiding peak demand charges.

In Florida, it’s recommended to run the pump for a minimum of 8 to 12 hours. However, it’s best to avoid running it during peak demand periods. If you have any questions or need help improving your pool runtime, feel free to contact Clear Tech Pools.

Our Pool Services